The weather is getting cold, everyone pays attention to the body. This time, Jiangxi Baofeng Fan Electric Equipment Co., Ltd. will introduce the installation procedures and precautions of the Jiangxi centrifugal fan .
Step 1: Let us first have a sufficient understanding of the Jiangxi centrifugal fan we purchased, so that we can ensure that there are no errors in the entire installation process, not only to understand the size and specifications of the FRP fan, etc., we also have to Know the rotation angle of the fan impeller and the direction of the airflow generated by the fan. After mastering the basic common sense of zui, it is necessary to inspect the parts of the fan, the impeller must not be worn, other parts and accessories must also be kept intact, and the connection must be kept tight. Once wear is found, appropriate repairs must be made.
Step 2: After the inspection is completed, install the centrifugal fan. The inlet and outlet ducts need separate support. The fan must be kept level and properly adjusted. The FRP fan, the foundation, and the air outlet pipe match each other, and the connection must be natural.
Step 3: After completing the installation procedure, turn the impeller to perform a preliminary inspection of the impeller. The impeller cannot be too tight or touched. After the inspection is completed, carry out a trial operation and use appropriate safety props to protect the FRP fan. transmission.
Step 4: The centrifugal fan must have reliable and safe wiring treatment, its casing must also be grounded, and its power supply must be complete. The method must be correct during wiring.
Step 5: After all the centrifugal fans are installed and the wiring is completed, you need to check whether there is any debris inside the centrifugal fans and be sure to clean them up.
The above jiu is introduced by Jiangxi Baofan Electric Equipment Co., Ltd. to introduce the installation procedure of the next Jiangxi centrifugal fan and the matters needing attention during the installation. See you next time!
Jiangxi Baofeng Fan Electric Equipment Co., Ltd. National Toll-free Service Hotline: 400-651-0908 Contact Phone: General Manager Huang: 18007092345, General Manager Zhang: 13507085256, General Manager Wang: 15879165519 Telephone: 0791-88251678 Fax: 0791-85987552 Email: 40708050 @ qq.com Store Address: No. 233-235, Building 22, East China Expo City, Guangzhou Road, Qingyunpu District, Nanchang City, Jiangxi Province Factory Address: Liantang North Avenue, Liantang Town, Nanchang City, Jiangxi Province (opposite to Jiangxi Technological College) Keywords on this page: Jiangxi Fan, Nanchang Fan, Jiangxi Cooler, Jiangxi Water Cooling Fan, Jiangxi Axial Flow Fan, Blower, Jiangxi Double Inlet Air, Single Inlet Air, Centrifugal Fan, Snail Fan, Jiangxi Cabinet Fan, Jiangxi Fume Purifier, Smokeless Barbecue Car Jiangxi smokeless purifier, protector, distribution box, small fan, kitchen fan, Jiangxi fire fan